Water Pressure Sensor | Transducers & Transmitters for Pumps, RO & HVA
Winsen water pressure sensors measure gauge or absolute pressure in pumps, pipelines, RO/UF skids, boilers, and HVAC water loops. Choose rugged industrial transmitters with 4–20 mA / 0–10 V outputs, or OEM sensor cores for compact devices and smart meters.
OEM/ODM • ಖಾಸಗಿ ಲೇಬಲಿಂಗ್ • ವೇಗದ ಪ್ರಮುಖ ಸಮಯ
- 0–6 / 0–10 / 0–16 bar typical water ranges
- 4–20 mA / 0–10 V PLC & BMS ready
- SS316L / Ceramic robust wetted parts
- IP-rated field installation









Overview & Types
Water pressure sensors convert hydrostatic or line pressure into a calibrated electrical signal. For industrial water, the common modes are:
Gauge pressure — pipelines, pumps, RO/UF skids, boilers, HVAC water loops.
Absolute pressure — special reference measurements and test benches.
Differential pressure (ΔP) — across filters, membranes and orifices to monitor fouling and flow.
ಪ್ರೆಶರ್ ಸೆನ್ಸರ್ ಮತ್ತು ಟ್ರಾನ್ಸ್ಮಿಟರ್ ಹೋಲಿಕೆ ಅವಲೋಕನ
| ವರ್ಗ | ಮಾದರಿ | ವಿದ್ಯುತ್ ಸರಬರಾಜು / ಔಟ್ಪುಟ್ | ಪತ್ತೆ ವ್ಯಾಪ್ತಿ | ನಿಖರತೆ / ರೇಖಾತ್ಮಕವಲ್ಲದತೆ | ಒತ್ತಡದ ಉಲ್ಲೇಖ | ಆಪರೇಟಿಂಗ್ ತಾಪಮಾನ | ಶೆಲ್ ವಸ್ತು | ಟೀಕೆಗಳು |
| ಹರಡಿರುವ ಸಿಲಿಕಾನ್ ಒತ್ತಡ ಸಂವೇದಕ | WPAK70 | 1.5mA / mV | -100kPa ~ 0 ~ 10kPa…10MPa | ≤±0.3%FS | ಗೇಜ್ / ಸಂಪೂರ್ಣ / ಮೊಹರು ಗೇಜ್ | -40℃ ~ 120℃ | – | ಹೆಚ್ಚಿನ ಬಹುಮುಖತೆ, ಕಾಂಪ್ಯಾಕ್ಟ್ ವಿನ್ಯಾಸ |
| WPAK69 | 1.5mA / mV | -100kPa ~ 0 ~ 10kPa…10MPa | ≤±0.3%FS | ಗೇಜ್ / ಸಂಪೂರ್ಣ / ಮೊಹರು ಗೇಜ್ | -40℃ ~ 120℃ | – | WPAK70 ಅನ್ನು ಹೋಲುತ್ತದೆ | |
| WPAK68 | 1.5mA / mV | -100kPa ~ 0 ~ 10kPa…100MPa | ≤±0.3%FS | ಗೇಜ್ / ಸಂಪೂರ್ಣ / ಮೊಹರು ಗೇಜ್ | -40℃ ~ 120℃ | – | ವಿಸ್ತೃತ ಶ್ರೇಣಿಯ ಆವೃತ್ತಿ | |
| WPAK67 | 1.5mA / mV | 0 ~ 10kPa…2.5MPa | ≤±0.3%FS | ಭೇದಾತ್ಮಕ ಒತ್ತಡ | -40℃ ~ 120℃ | – | ಡಿಫರೆನ್ಷಿಯಲ್ ಅಪ್ಲಿಕೇಶನ್ಗಳಿಗಾಗಿ | |
| WPAK66 | 1.5mA ಅಥವಾ 10V / mV | 6MPa…60MPa | ≤±0.3%FS | ಮೊಹರು ಗೇಜ್ | -40℃ ~ 120℃ | – | ಹೆಚ್ಚಿನ ಶ್ರೇಣಿಗಳಿಗೆ ಮೊಹರು ವಿನ್ಯಾಸ | |
| Wpek65 | 1.5mA ಅಥವಾ 10V / mV | -100kPa ~ 0 ~ 10kPa…16MPa | ≤±0.3%FS | ಗೇಜ್ / ಸಂಪೂರ್ಣ / ಮೊಹರು ಗೇಜ್ | -40℃ ~ 120℃ | – | ಸಾಮಾನ್ಯ ಉದ್ದೇಶದ ಸಂವೇದಕ | |
| WPAK64 | 1.5mA ಅಥವಾ 10V / mV | -100kPa ~ 0 ~ 10kPa…25MPa | ≤±0.3%FS | ಗೇಜ್ / ಸಂಪೂರ್ಣ / ಮೊಹರು ಗೇಜ್ | -40℃ ~ 120℃ | – | ಮಧ್ಯಮ ವ್ಯಾಪ್ತಿಯ ವ್ಯಾಪ್ತಿ | |
| Wopak63j | 1.5mA / mV | -100kPa ~ 0 ~ 10kPa…100MPa | ≤±0.3%FS | ಗೇಜ್ / ಸಂಪೂರ್ಣ / ಮೊಹರು ಗೇಜ್ | -40℃ ~ 120℃ | – | ವಿಶೇಷ ಆರೋಹಣಕ್ಕಾಗಿ ಜೆ-ಟೈಪ್ ಆವೃತ್ತಿ | |
| WPAK63 | 1.5mA ಅಥವಾ 10V / mV | -100kPa ~ 0 ~ 10kPa…100MPa | ≤±0.3%FS | ಗೇಜ್ / ಸಂಪೂರ್ಣ / ಮೊಹರು ಗೇಜ್ | -40℃ ~ 120℃ | – | ವ್ಯಾಪಕ ಶ್ರೇಣಿಯೊಂದಿಗೆ ಬಹುಮುಖ | |
| ಸೆರಾಮಿಕ್ ಒತ್ತಡ ಸಂವೇದಕ | WPAH01 | 2-20V / mV | 0 ~ 200kPa…40MPa | ≤±0.3%FS | – | -40℃ ~ 125℃ | – | ಹೆಚ್ಚಿನ ರಾಸಾಯನಿಕ ಪ್ರತಿರೋಧ |
| ಪ್ಲಾಸ್ಟಿಕ್ ಮೊಹರು ಒತ್ತಡ ಸಂವೇದಕ | WPAS12 | ಡಿಜಿಟಲ್ ಮತ್ತು ಅನಲಾಗ್ | 15-115kPa | – | – | -40℃ ~ 125℃ | – | ವೆಚ್ಚ-ಪರಿಣಾಮಕಾರಿ, ಕಾಂಪ್ಯಾಕ್ಟ್ |
| WPAS02 | ಡಿಜಿಟಲ್ ಮತ್ತು ಅನಲಾಗ್ | 10kPa ~ 100kPa | – | – | -20℃ ~ 80℃ | – | ಗಾಳಿ/ಅನಿಲಕ್ಕೆ ಮೂಲ ಸಂವೇದಕ | |
| WPAS01 | ಡಿಜಿಟಲ್ ಮತ್ತು ಅನಲಾಗ್ | 10kPa ~ 100kPa | – | – | -40℃ ~ 125℃ | – | ದೃಢವಾದ ಅಧಿಕ ತಾಪಮಾನ ಸಹಿಷ್ಣುತೆ | |
| ಪ್ರಸಾರವಾದ ಸಿಲಿಕಾನ್ ಪ್ರೆಶರ್ ಟ್ರಾನ್ಸ್ಮಿಟರ್ | WPCK81 | 4-20mA, RS485 | 0 ~ 1m…200mH₂O | ±0.5%FS / ±1%FS | ಗೇಜ್ ಒತ್ತಡ | – | ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ | ಆಳವಾದ ಮಟ್ಟದ ಮತ್ತು ಟ್ಯಾಂಕ್ ಮಟ್ಟದ ಅಳತೆಗಳಿಗಾಗಿ |
| WPCK62 | 4–20mA (ಐಚ್ಛಿಕ) | 0 ~35kPa…25MPa | ±0.5%FS | ಗೇಜ್ / ಸಂಪೂರ್ಣ / ಮೊಹರು ಗೇಜ್ | – | ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ | ವ್ಯಾಪಕವಾಗಿ ಹೊಂದಾಣಿಕೆಯ, ಥ್ರೆಡ್ ಆಯ್ಕೆಗಳು | |
| WPCK08 | 4-20mA, RS485 | 0 ~ 200mH₂O | ±0.5%FS | ಗೇಜ್ ಒತ್ತಡ | – | ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ | ಸ್ಫೋಟ ನಿರೋಧಕ ಆವೃತ್ತಿ | |
| WPCK07 | 4–20mA, 0.5–4.5V, 0–5V, 1–5V, 0–10V, 1–10V | -100kPa ~ 0 ~ 10kPa…100MPa | ±0.5%FS | ಗೇಜ್ / ಸಂಪೂರ್ಣ / ಮೊಹರು ಗೇಜ್ | – | ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ | ಪೂರ್ಣ ಶ್ರೇಣಿಯ ಔಟ್ಪುಟ್ ವಿಧಗಳು | |
| WPCK05 | 0.5–4.5V, 0–5V, 1–5V, 0–10V, 1–10V | -100kPa ~ 0 ~ 10kPa…100MPa | ±0.5%FS | ಗೇಜ್ / ಸಂಪೂರ್ಣ / ಮೊಹರು ಗೇಜ್ | – | ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ | ವೋಲ್ಟೇಜ್ ಔಟ್ಪುಟ್ ಆಯ್ಕೆಗಳು | |
| WPCK03 | I²C, 4–20mA, 0.5–4.5V ಮತ್ತು ಇನ್ನಷ್ಟು | -100kPa ~ 0 ~ 10kPa…100MPa | ±0.2%FS, ±0.5%FS (ಕಸ್ಟಮ್) | ಗೇಜ್ / ಸಂಪೂರ್ಣ / ಮೊಹರು ಗೇಜ್ | – | ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ | ಹೊಂದಿಕೊಳ್ಳುವ ಸಿಗ್ನಲ್ ಪ್ರಕಾರಗಳು, ಹೆಚ್ಚಿನ ನಿಖರತೆ | |
| ಸೆರಾಮಿಕ್ ಪ್ರೆಶರ್ ಟ್ರಾನ್ಸ್ಮಿಟರ್ | WPCH04 | 0.5–4.5V (ಕಸ್ಟಮೈಸ್) | 0.2MPa…40MPa | 0.1%FS (ಡೀಫಾಲ್ಟ್) | – | – | ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ | ಹೆಚ್ಚಿನ ನಿಖರವಾದ ಸೆರಾಮಿಕ್ ಕೋರ್ |
| WPCH01 | 4–20mA, 0/1–5/10V, 0.5–4.5V | 0.2-5MPa | 0.1% ~ 5.0%FS (ಡೀಫಾಲ್ಟ್ 2.0%) | – | – | ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ | ಗ್ರಾಹಕೀಯಗೊಳಿಸಬಹುದಾದ, ಬಹುಮುಖ ಉತ್ಪನ್ನಗಳು | |
| WPBH01 | ಅನುಪಾತದ ವೋಲ್ಟೇಜ್ (0.5–4.5V) | 2–400 ಬಾರ್ (ಕಸ್ಟಮೈಸ್) | 0.5%, 1%, 2% (ಡೀಫಾಲ್ಟ್), 3% | – | – | ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ | ವಿಶಾಲ ಒತ್ತಡದ ವ್ಯಾಪ್ತಿ | |
| ಗ್ಲಾಸ್ ಮೈಕ್ರೋ-ಫ್ಯೂಸಿಂಗ್ ಟ್ರಾನ್ಸ್ಮಿಟರ್ | WPCK89 | ಡಿಜಿಟಲ್ ಮತ್ತು ಅನಲಾಗ್ | 0 ~ 100 / 150 / 250 / 500 psig | ± 1%ಎಫ್ಎಸ್ | – | – | ಸ್ಟೇನ್ಲೆಸ್ ಸ್ಟೀಲ್ | ಅತ್ಯಂತ ದೃಢವಾದ ಮತ್ತು ಉಷ್ಣವಾಗಿ ಸ್ಥಿರವಾಗಿರುತ್ತದೆ |
ಆಯ್ಕೆ ಮಾರ್ಗದರ್ಶಿ
| ಕೇಸ್ ಬಳಸಿ | Recommended Range | ಮಾದರಿ | Preferred Output | ಟಿಪ್ಪಣಿಗಳು |
|---|---|---|---|---|
| Building water / booster sets | 0–10 / 0–16 bar | WPCK05 / WPCK07 | 4–20 mA | Snubber for water hammer; shielded cable for EMC. |
| RO/UF membrane racks | 0–6 / 0–10 bar | WPCK62 | 0–10 V or 4–20 mA | Compact for skids; monitor feed and concentrate lines. |
| Boilers / hot water circuits | 0–16 / 0–25 bar | WPCK03 | 4–20 mA | Select seals for temperature (FKM/PTFE); verify overload. |
| Filter status (ΔP across housing) | ±100…±300 kPa | WPAK67 ΔP | 4-20 mA / 0-10 V | Equal-length tubing; add air trap or drip loop. |
| Rough utilities / pulsating pumps | 0–10 / 0–16 bar | WPCH04 | 4–20 mA | Ceramic diaphragm tolerates ripple & particles. |
| OEM ಸ್ಮಾರ್ಟ್ ಗೇಜ್/ಹೆಡ್ | 0–10 / 0–16 bar | WPAK66 (core) | Board-level | Add your display, electronics, and enclosure. |
Threads: G1/4, G1/2, 1/4-NPT, 1/2-NPT and others. Seals: EPDM (potable), FKM (hot water), PTFE (chemicals) — choose per medium and temperature.
Applications & Industries
Municipal & Building Water
Booster sets, zones, risers and meter pits — stable monitoring and leak detection logic.
RO/UF & Process Skids
Feed/concentrate pressure, membrane ΔP and CIP verification for water treatment lines.
HVAC Water Loops
Chilled/hot water circuits, differential across coils, and pump protection.
Firefighting & Sprinklers
0–16 bar typical with alarm thresholds and event logging to the BMS.
Boilers & Heat Exchangers
Higher ranges and temperature-tolerant seals for steam-side auxiliaries and hot water.
ಜಾಗತಿಕ ಗ್ರಾಹಕರು ನಮ್ಮನ್ನು ಏಕೆ ಆಯ್ಕೆ ಮಾಡುತ್ತಾರೆ?
ಕಂಪನಿಯು "ಉತ್ತಮ ಕರಕುಶಲತೆ, ವೈಜ್ಞಾನಿಕ ನಾವೀನ್ಯತೆ, ಶ್ರೇಷ್ಠತೆಯ ಅನ್ವೇಷಣೆ ಮತ್ತು ಮೌಲ್ಯವರ್ಧಿತ ಸೇವೆಯ" ಗುಣಮಟ್ಟದ ನೀತಿಯನ್ನು ಸ್ಥಿರವಾಗಿ ಅನುಸರಿಸುತ್ತದೆ. ಉತ್ಪಾದನಾ ಪ್ರಕ್ರಿಯೆ ನಿಯಂತ್ರಣ ಯೋಜನೆಗಳು ಮತ್ತು ಕೆಲಸದ ಸೂಚನೆಗಳನ್ನು ರೂಪಿಸುವ ಮೂಲಕ, ಇದು ಪ್ರಮಾಣಿತ, ಜವಾಬ್ದಾರಿಯುತ ಮತ್ತು ನಿಯಂತ್ರಿತ ಪ್ರಕ್ರಿಯೆ ನಿರ್ವಹಣಾ ವ್ಯವಸ್ಥೆಯನ್ನು ಸ್ಥಾಪಿಸಿದೆ. ಹೆಚ್ಚುವರಿಯಾಗಿ, ಕಂಪನಿಯು ಸ್ವತಂತ್ರವಾಗಿ MES ಉತ್ಪಾದನಾ ನಿರ್ವಹಣಾ ವ್ಯವಸ್ಥೆಯನ್ನು ಅಭಿವೃದ್ಧಿಪಡಿಸಿದೆ, ಸಂಪೂರ್ಣ ಕೆಲಸದ ಹರಿವಿನಾದ್ಯಂತ ಸಮಗ್ರ ಮತ್ತು ದೃಶ್ಯ ನಿರ್ವಹಣೆಯನ್ನು ಸಕ್ರಿಯಗೊಳಿಸುತ್ತದೆ.

30+ ವರ್ಷಗಳ ಅನುಭವ
R&D, manufacture and sales of sensors and sensing solutions.
ಗುಣಮಟ್ಟದ ಗ್ಯಾರಂಟಿ ನಿರಂತರ ಸುಧಾರಣೆ
ಸಂಪೂರ್ಣ ಮತ್ತು ಕಟ್ಟುನಿಟ್ಟಾದ ಪ್ರಕ್ರಿಯೆಯ ಹರಿವಿನ ನಿಯಂತ್ರಣ, ಗಮನಾರ್ಹ ಸುಧಾರಣೆಗಳೊಂದಿಗೆ.


ಅಂತರಾಷ್ಟ್ರೀಯ ಮಾರುಕಟ್ಟೆ
100 ಕ್ಕೂ ಹೆಚ್ಚು ದೇಶಗಳು ಮತ್ತು ಪ್ರದೇಶಗಳಿಗೆ ಸಂವೇದನಾ ಉತ್ಪನ್ನಗಳನ್ನು ತಲುಪಿಸಿ.
ಸ್ಥಿರ ಪೂರೈಕೆ ಸರಪಳಿ ವಿಶ್ವಾಸಾರ್ಹ ಉತ್ಪಾದನೆ
ಕೋರ್ ಘಟಕಗಳು ನಿರ್ಬಂಧಗಳಿಗೆ ಒಳಪಡುವುದಿಲ್ಲ, ತಯಾರಿಕೆ ಮತ್ತು ಪರೀಕ್ಷೆಗಾಗಿ ಸುಧಾರಿತ ಉಪಕರಣಗಳು.


R&D STRENGTH TECHNOLOGY INNOVATION
200+ patents, 180+ R&D team members, self-built labs for continous innovation.
ಏಕ-ನಿಲುಗಡೆ ಸೇವೆ
ವೃತ್ತಿಪರ ಸಮಾಲೋಚನೆ, ವೇಗದ ವಿತರಣೆ, 24 ಗಂಟೆಗಳ ನಂತರ ಮಾರಾಟದ ಬೆಂಬಲ.

Leading the Industry, Innovative & Controllable Technology
With robust R&D capabilities, we maintain sustained input in R&D and unwavering commitment to technological innovation. This not only ensures that we remain at the forefront of industry but also drives continuous innovation, leading the future trend of the sensing industry.
10% R&D Input
The average annual R&D input exceeds 10% of the annual revenue.
5+ R&D Layout
With Zhengzhou headquarters as the core, a nationwide R&D and innovation system is being established, encompassing cities of Shanghai, Wuhan, Shenzhen, and Taiyuan.
180+ R&D Team
There are over 180 R&D personnel, including more than 10 with doctoral degrees and over 50 with master's degrees, who have an average of more than 8 years of experience in sensor development.
20+ ಪ್ರಯೋಗ ವಿಧಗಳು
ಅನಿಲ-ಸಂಬಂಧಿತ, ಹವಾಮಾನ ಪರಿಸರ, EMC, ಎಲೆಕ್ಟ್ರಿಕಲ್ ಕಾರ್ಯಕ್ಷಮತೆ, ಯಾಂತ್ರಿಕ ಕಾರ್ಯಕ್ಷಮತೆ, ಇತ್ಯಾದಿ.
10+ ಸುಧಾರಿತ ಪ್ರಯೋಗಾಲಯಗಳು
CNAS ಪ್ರಯೋಗಾಲಯ, MEMS ಪ್ರಯೋಗಾಲಯ, UL ಪ್ರಯೋಗಾಲಯ, ನ್ಯಾನೊಕಾಂಪೊಸಿಟ್ ಮೆಟೀರಿಯಲ್ಸ್ ಲ್ಯಾಬೋರೇಟರಿ, ಇತ್ಯಾದಿ.
400+ sets Leading R&D Equipment
ಕ್ಯೂಬ್ ಸ್ಟೋರೇಜ್, ಡೈ ಬಾಂಡರ್, ಲಿಥೋಗ್ರಫಿ ಮೆಷಿನ್, ಕೋಟಿಂಗ್ ಮೆಷಿನ್, SMT ಪ್ಲೇಸ್ಮೆಂಟ್ ಮೆಷಿನ್, ಆಟೋಮ್ಯಾಟಿಕ್ ಪ್ರೋಬ್ ಸ್ಟೇಷನ್, ಇತ್ಯಾದಿ.
Integration & Installation
4–20 mA (2-wire): Best for long noisy runs to PLC/BMS. Use 12–36 VDC loop power and keep loop impedance within spec.
0–10 V: Simple to panel meters/DAQ; ensure high-impedance input (>10 kΩ) and clean supply.
Mechanical: Mount away from check/solenoid valves to reduce hammer; add a snubber; orient process port upward when possible to avoid air pockets.
- Confirm overload/burst vs. transient spikes.
- Select seal materials for temperature and chemistry.
- For ΔP tubing, use equal length and add drip loops/air traps.
Ordering & Bulk Purchasing
ಹೇಗೆ ನಿರ್ದಿಷ್ಟಪಡಿಸುವುದು
- Measurement & range (e.g., gauge 0–10/16 bar; ΔP ±200 kPa)
- Output (4–20 mA, 0–10 V, 0.5–4.5 V)
- Process thread (G1/4, G1/2, 1/4-NPT, 1/2-NPT, tri-clamp)
- Connector/cable (M12, DIN, Deutsch/Packard, pigtail)
- Medium & temperature (potable, RO, hot water, CIP/SIP)
- Docs (test report, calibration cert, labeling)
ಕಾರ್ಯಕ್ರಮದ ನಿಯಮಗಳು
- Samples for validation and bench tests
- ವಾಲ್ಯೂಮ್ ವೇಳಾಪಟ್ಟಿಗಳಿಗಾಗಿ ಶ್ರೇಣೀಕೃತ ಬೆಲೆ
- Private labeling & custom packaging
- Rolling forecasts with safety stock options
ಡಿಫರೆನ್ಷಿಯಲ್ ಪ್ರೆಶರ್ ಸೆನ್ಸರ್ vs ಟ್ರಾನ್ಸ್ಡ್ಯೂಸರ್ vs ಟ್ರಾನ್ಸ್ಮಿಟರ್
| ಸಾಧನ | ಉತ್ಪಾದನೆ | ವಿಶಿಷ್ಟ ಬಳಕೆ | ಸಾಧಕ | ಪರಿಗಣನೆಗಳು |
|---|---|---|---|---|
| ΔP ಸಂವೇದಕ (ಬೋರ್ಡ್/ಕಾಂಪ್ಯಾಕ್ಟ್) | ರೇಟಿಯೊಮೆಟ್ರಿಕ್ / I²C / SPI | ಎಂಬೆಡೆಡ್ ಸಾಧನಗಳು, ಉಪಕರಣಗಳು | ಸಣ್ಣ, ಕಡಿಮೆ-ಶಕ್ತಿ, ವೆಚ್ಚ-ಪರಿಣಾಮಕಾರಿ | ಹೋಸ್ಟ್ ಎಲೆಕ್ಟ್ರಾನಿಕ್ಸ್ ಮತ್ತು ಆವರಣದ ಅಗತ್ಯವಿದೆ |
| ΔP ಪರಿವರ್ತಕ | 0–10 V / 4-20 mA | PLC/DAQ ಮಾಪನ | ಸರಳ ವೈರಿಂಗ್, ದೀರ್ಘ ಕೇಬಲ್ ರನ್ಗಳು | ಬಾಹ್ಯ ಪ್ರದರ್ಶನ/ರಿಲೇಗಳನ್ನು ಸೇರಿಸಲಾಗಿಲ್ಲ |
| ΔP ಟ್ರಾನ್ಸ್ಮಿಟರ್ | ನಿಯಮಾಧೀನ + ಆವರಣ (ಸಾಮಾನ್ಯವಾಗಿ ಪ್ರದರ್ಶನ/ರಿಲೇಗಳು) | ಕ್ಷೇತ್ರ ಸ್ಥಾಪನೆ, ಫಲಕ ಆರೋಹಣ | ಒರಟಾದ, ಅನುಸ್ಥಾಪಕ-ಸ್ನೇಹಿ | ದೊಡ್ಡ ಗಾತ್ರ ಮತ್ತು ಹೆಚ್ಚಿನ ವೆಚ್ಚ |
ಯಾವುದನ್ನು ಆರಿಸಬೇಕೆಂದು ಖಚಿತವಾಗಿಲ್ಲವೇ? ನಿಮ್ಮ ನಿಯಂತ್ರಕ ಮಾದರಿ ಮತ್ತು ಆರೋಹಿಸುವ ಸ್ಥಳವನ್ನು ಹಂಚಿಕೊಳ್ಳಿ - ನಾವು ಸರಿಯಾದ ಪ್ಯಾಕೇಜ್ ಅನ್ನು ಶಿಫಾರಸು ಮಾಡುತ್ತೇವೆ.
ಪದೇ ಪದೇ ಕೇಳಲಾಗುವ ಪ್ರಶ್ನೆಗಳು (FAQ)
What range should I choose for water systems?
0–6 bar for RO/UF, 0–10 bar for building water and HVAC loops, 0–16 bar for boosters/sprinklers, and up to 25 bar for boilers. Use compound ranges if slight vacuum occurs.
Which diaphragm and seals are best?
SS316L suits most water; ceramic improves tolerance to pulsation/solids. Choose EPDM for potable water, FKM for hot water, and PTFE for chemical compatibility.
How to mitigate water hammer?
Install a snubber/restrictor, place the sensor away from fast valves, and consider accumulators; verify overload and burst ratings.
Can I monitor filter fouling?
Yes. Use a differential pressure transducer across the filter housing to trend ΔP and plan cartridge changeouts.
Do you offer sanitary or flush-diaphragm builds?
Yes. We can customize tri-clamp and flush-mount process connections for food/pharma water with CIP/SIP.
What documentation can I get?
Standard test reports are included; calibration certificates and serialized labels are available per your QA program.

























