絶対圧からゲージ圧への変換器 (ΔP 計算機)

絶対圧・ゲージ圧・差圧変換器(ステップ付)

このツールを使用して変換します 絶対圧力 (P腹筋) そして ゲージ圧力 (Pg) 大気圧 (PATM), and to calculate 差圧 (ΔP) between two points. It shows the full calculation process so engineers can verify the method, document results, and copy the output into reports.

アブソリュート⇄ゲージ(大気圧が必要)

核となる関係: Pabs = Pg + Patm そして Pg = Pabs − Patm. Standard sea-level Patm is 101.325kPa (現地の気圧に置き換えることもできます)。

差圧(P1−P2)

差圧は、次の 2 点間の差です。 ΔP = P1 − P2. If both pressures share the same reference (both absolute or both gauge), the differential is directly comparable.

絶対圧、ゲージ圧、差圧の違いは何ですか?

絶対圧力 (Pabs) is referenced to a perfect vacuum (0 Pa absolute). It is the value you typically need for gas laws, altitude/barometric calculations, and many vacuum applications.

ゲージ圧(Pg) is referenced to local atmospheric pressure (Patm). Most industrial pressure gauges and many process sensors report gauge pressure because it directly indicates pressure above ambient.

差圧(ΔP) is the difference between two pressures (P1 and P2), widely used for filters, flow across an orifice/venturi, HVAC airflow, and level measurement in tanks.

エンジニアリングで使用される最も一般的な関係: Pabs = Pg + Patm. If you know any two of these values, you can solve the third.

圧力早見表(共通基準点)

These quick conversions help you sanity-check results. Values below use standard relationships and typical constants (e.g., 1 atm = 101.325 kPa, 1 bar = 100 kPa, 1 psi = 6.894757 kPa).

共通の価値観 KPA バー psi ATM

ヒント: 真空範囲で作業する場合は、絶対圧力単位の使用を検討し、特定の機器またはスペックシートで必要な場合にのみゲージに変換してください。

FAQ: 絶対圧 vs ゲージ vs 差圧

1) ゲージ圧を絶対圧に変換するにはどうすればよいですか?

ゲージ圧に大気圧を加算します。 Pabs = Pg + Patm. For example, if Pg = 200 kPa and Patm = 101.325 kPa, then Pabs = 301.325 kPa.

2) 絶対圧力をゲージ圧力に変換するにはどうすればよいですか?

絶対圧力から大気圧を引く: Pg = Pabs − Patm. This tells you pressure above ambient.

3) これらの変換において大気圧が重要なのはなぜですか?

Gauge pressure is defined relative to the surrounding atmosphere. If you change altitude or local weather, Patm changes slightly, which changes the gauge/absolute relationship.

4) 差圧はゲージ圧と同じですか?

いいえ。ゲージ圧は 1 点の大気を基準にしていますが、差圧は 2 点を比較します。 ΔP = P1 − P2。差圧は通常、フィルター、コイル、およびフロー要素全体で使用されます。

5) ゲージ圧を使用して ΔP を計算できますか?

Yes—if both readings are taken with the same reference (both gauge or both absolute). When both are gauge, the atmospheric reference cancels out in the difference.

6) 使用する一般的な大気圧値はどれくらいですか?

標準海面大気圧は、 101.325kPa (1 atm). For higher accuracy, use a local barometer value, especially in altitude-sensitive measurements.

わからない どのセンサー 正しいですよね?

今すぐ無料の最初の相談を受けてください